Eng | 中
FLASHFORGE
  • Home
  • Products
    • Adventurer 3
    • Adventurer 4
    • Creator Pro 2
    • Creator 3 Pro
    • Creator 4
    • Guider IIs
    • Guider 3
    • Guider 3 Plus
    • Foto 9.25
    • Foto 13.3
    • Hunter
    • WaxJet 400
  • Materials
  • Support
  • Blog
  • Contact Us
  • Home
  • Products
    • Adventurer 3
    • Adventurer 4
    • Creator Pro 2
    • Creator 3 Pro
    • Creator 4
    • Guider IIs
    • Guider 3
    • Guider 3 Plus
    • Foto 9.25
    • Foto 13.3
    • Hunter
    • WaxJet 400
  • Materials
  • Support
  • Blog
  • Contact Us

3D Printing Settings to Minimise Warping Issue

3/11/2016

 
Picture
Image source:3daftermarket
You may sometimes encounter the warping issue during 3d printing. Today we are going to talk about what settings we should do in the 3D slicing software in order to minimise the warping issue.
If want to minimise the warping problem, we first can set the print speed slower in the 3d slicing software. Slower print speed can help the model to attached on a build platform more firmly, which can help decrease warping issue. In the Flashprint's Speed menu, the print speed can be adjusted as following:
Picture
Also, if your 3D printer is equipped with a heat bed please heat the bed according to what the printing material you will use (PLA generally is 60 °C,and ABS generally is 110°C). Heating the bed can effectively minimise the warping problem. To heat the bed in the 3D slicing software Flashprint, user can adjust it in the Temperature menu as following:
Picture
Activating raft function can also help minimise warping issue:
3D Printing Settings to Minimise Warping Issue -  Flashforge Flashprint
Lastly, too high infill density could cause the warping. If warping happens, try to decrease the infill density. In general, infill density can be set 15%-30%.
Picture
3D Printing Settings to Minimise Warping Issue - Flashforge Flashprint

Other Article:
Picture


What is the support function in the 3D slicing software



Alejandro
27/11/2018 02:38:59

Hi, I have a "Finder" with the original filament and almost pieces have warping, how can I set the printer for avoid it?

Thanks

[Preferently without buy another sources]

JSIII
25/11/2019 22:30:07

For PLA prints with a broad base and one or more parts that stick up from it, (example 3d_corner_20x20.stl from Thingiverse), the following solution seems to work:
Invert the model 180° in your print software, so that the thin extensions are printed first
Use support
Use a raft
This has worked for me so far.
Flashforge Finder, no heated bed (of course), PVA used for adhesion on original flashforge bed-sticker.


Comments are closed.

    Blog

    Archives

    June 2022
    November 2016
    October 2016
    September 2016
    February 2016
    October 2015
    August 2015
    June 2015

    Categories

    All
    3D Slicing Software Settings

    RSS Feed

Products

Adventurer 3
​Adventurer 4
Creator Pro 2
​Creator 3
Creator 3 Pro
Creator 4​
Guider IIs
Foto 8.9
Foto 13.3
Hunter

​WaxJet 400

Support

Warranties
Course Booking

Flashforge

Contact Us
​Blog

English  中
 © COPYRIGHT 2022. ALL RIGHTS RESERVED.